Get a Quote
(08) 8789 8786
Call Now

Rangehood Installation Melbourne

Improve kitchen airflow and reduce smoke, steam and grease with professional rangehood installation by licensed Melbourne electricians. Electcomm Group Electrical & Data handle the wiring, ventilation and fit-off – cleanly and safely.

Get a quote

Trust. Reliability. Honesty.

Need a Rangehood Installed by a Licensed Electrician in Melbourne?

Upgrading your kitchen or replacing a noisy, ineffective rangehood? We install ducted and recirculating models with correct wiring, safe power connections and proper venting. Fast turnarounds, no mess, and fully compliant with Australian Standards.

Services

Our Rangehood Installation Services in Melbourne

Whether you’re renovating or replacing an old unit, Electcomm Group Electrical & Data install all types of rangehoods with clean wiring, correct venting and full compliance from start to finish

Get a quote

Ducted Rangehood Installation

We connect your rangehood to external ducting, wire it safely to the switchboard, and ensure proper airflow to remove smoke and cooking odours from your home.

Recirculating Rangehood Installation

For homes without external vents, we install recirculating units with charcoal filters, secure the fittings, and wire the unit for safe operation.

Rangehood Replacement

Electcomm Group Electrical & Data remove your old rangehood, clean and prepare the area, adjust fittings if needed and install the new unit with a neat, flush finish.

Power and Switch Wiring

Our team install or upgrades the power supply as required, including isolator switches and circuit protection, so your rangehood runs safely and reliably.

Renovation-Ready Setup

If you’re mid-reno, we can rough in new wiring, coordinate with your cabinetmaker or builder, and return for final fit-off once your kitchen is ready.

Call Electcomm Group Electrical & Data

(03) 8789 8786

Why Professional Rangehood Installation Matters

Installing a rangehood isn’t just about mounting it on the wall; it needs the right power supply, proper clearance and safe venting to actually do its job:

Correct wiring and circuit protection

We make sure your rangehood is wired to a dedicated circuit or safely integrated into your existing kitchen load.

Safe venting and airflow

Poorly vented or blocked ducting can push steam and grease back into your kitchen. We check air paths and fit vents that actually work.

Compliance with Australian Standards

We follow current electrical and ventilation codes to keep your install compliant and your warranty valid.

No damage to cabinets or finishes

We protect your cupboards, splashbacks and cooktop surfaces during install, so nothing’s scratched or poorly cut.

Avoid fire hazards and overloads

DIY installs can lead to loose wiring, overloaded circuits or hidden fire risks. We eliminate those problems before they start.

What Type of Rangehood Is Best for Your Kitchen?

Choosing the right rangehood depends on your cooking style, kitchen layout and ventilation needs. Here’s a quick guide to help:

Canopy Rangehoods

Great for larger cooktops and homes where frying, grilling or wok cooking is common.

Undermount Rangehoods

Perfect for minimalist kitchens with concealed cabinetry and clean lines.

Slide-Out Rangehoods

Best for smaller kitchens or apartments where space is limited.

Recirculating Rangehoods

Ideal when ducting isn’t possible, like in concrete-walled buildings or older homes.

Ducted Rangehoods

Offers the best ventilation by extracting air outside for maximum smoke and steam removal.

Process

Our Rangehood Installation Process

The team at Electcomm Group Electrical & Data make your install simple and stress-free, from the first visit to the final test:

Book and Inspect

We schedule a time that suits you, inspect the cabinet or wall space, check electrical access and confirm a fixed-price quote with no surprises.

Prepare the Area

Before installing, we assess ducting options, measure clearances, and protect splashbacks, cabinets and cooking surfaces.

Install and Wire

Our team mount the rangehood securely, runs the ducting (if needed), connects it safely to power and ensures airflow paths are clear.

Test and Clean Up

We test fan speeds, lighting and airflow performance, clean up the area, and provide compliance paperwork if required.

Why Homeowners in Melbourne Trust Us

From first-time renovators to experienced property managers, locals rely on us for rangehood installs that are fast, safe and done right the first time:

Licensed and Insured

All installations are handled by qualified electricians, not handymen, so your rangehood is wired to Australian Standards and fully compliant.

Fast, Flexible Scheduling

Need it installed before the weekend or after a delivery? Electcomm Group Electrical & Data offers same-day or next-day bookings whenever availability allows.

Fixed, Transparent Quotes

You’ll get a clear upfront quote that includes installation, wiring, ducting adjustments and safety checks, no guesswork or hidden costs.

Clean, Professional Finish

We take care in your kitchen, mounting your rangehood neatly, protecting surfaces and leaving no mess behind.

Testimonials

What They Say About us

Mel Gemelli
Great Service.
I received a call within minutes of logging my enquiry online. Kylie was amazing on the phone. Her communication was clear and her knowledge of the area was reassuring, making the whole experience smooth and positive.

Mick was prompt and professional. The quoting was clear and the suggestions of other matters were very helpful (I will definitely look to book them at a later date). The job was quick and clean.

Special mention of the Van it was very cool and bright and the fox will definitely attract the attention of kids.

Thanks again for the quick next morning response.
I needed a outdoor power point replaced due to storm damage all done within an hour.

Highly recommend
Casey
Highly recommend this company, great service.. moved into a new home and couldn’t find internet ports in house Mick was great ! Found connection an relocated with out a fuss! Kylie is reception is also super easy to deal with.
Steph Heyes
Rob was quick to move our nbn box and was extremely accomodating with times. Excellent communication from everyone in the business
James Paterson
Casper came to our business and connected two office buildings with 10 Gbps fibre lines (6 core), which have been working brilliantly ever since. Punctual, polite, friendly, and most importantly, does excellent quality work.

Highly Recommended.

James Paterson, I.T. Manager, Hydronic Systems Australia.
Joel Polkinghorne
Super fast coming out and installing a new smoke detector. Gave me options of equipment available and super flexible with payment. Would recommend.
Aiyana Roberts
Josh was an absolute weapon! Lovely guy and fixed our hot water and hallway light - honest, transparent, great work. Thanks!
chris hamod
I had Josh and Cooper work at my place amazing service, very tidy and very thoughtful on hole placements.

Very goo work, Josh was honest and transparent from the quote that why I chose to work with electcomm. Very professional highly recommended Josh and Cooper and Electcom.
Gerald Morna
Josh installed our induction hob and he did a great job!
Julie Hyne
Fabulous service, same day and on time, quickly and thoroughly assessed what needed to be done and completed the job timely , I now have great internet speed and coverage right through the house. Rob was very polite and pleasant to deal with
Raquel Floulis
Great experience, on time, friendly and quick.
Thanks Josh.
Evette Matthews
Thanks to the team at Electcomm for quickly responding to the power being out. They found the fault and gave us an option to upgrade our switchboard. All fixed in the day and they even cleaned up! Amazing service thanks.
Charlotte Aylward
Following an Electrical fault to our residence we found those attending to the issue.....mainly Casper and Josh, were trustworthy, hard working and efficient. Apart from being reliable they responded quickly and professionally. The quality of work and the clean up after was amazing. Thank you all so much...We were so thankful we rang you for help and repairs..!

Electrician in CArrum Downs

servicing Melbourne

Save yourself the hassle of multiple service providers and get in touch with Electcomm Group Electrical & Data to manage your properties. We have a large network of trades we can also call upon to provide seamless job outcomes saving time and money.

Need a New Rangehood Installed in Melbourne? Let’s Get It Sorted

Just bought a new rangehood or planning a kitchen upgrade? We’ll install it cleanly, wire it safely and get it running fast. Call Electcomm Group Electrical & Data on (03) 8789 8786 to book your rangehood installation with a licensed Melbourne electrician.

contact us

Frequently Asked Questions

Yes. If the rangehood is hardwired or integrated, it must be installed by a licensed electrician to meet safety standards.
Yes. If required, we’ll run new ducting to a wall or roof vent and ensure proper airflow. We’ll assess your setup on-site.
We can trim cabinetry, adjust cutouts or install a surround plate to ensure a clean, gap-free finish.
Most rangehood installs take between 1 and 2 hours. More complex jobs with ducting may take longer, but we’ll let you know upfront.
Yes. If external ducting isn’t an option, we can install a recirculating model with proper filters and placement.
Electcomm Group Electrical & Data install all major brands including Bosch, Westinghouse, Fisher & Paykel, Smeg and more. Just let us know what’s being delivered.