Get a Quote
(08) 8789 8786
Call Now

Oven Installation Melbourne

Upgrading your oven? Electcomm Group Electrical & Data provides fast, safe, and certified oven installation across Melbourne, including wiring, switchboard checks, and full compliance, handled by licensed electricians.

Get a quote

Trust. Reliability. Honesty.

Need a New Oven Installed by a Licensed Electrician in Melbourne?

Replacing an old oven or fitting a new model into your kitchen? Our team installs electric ovens with safe power connections, correct wiring and clean, no-fuss service. DIY installs can be dangerous. Every oven must meet current electrical standards and include a compliance certificate on completion.

Services

Our Oven Installation Services in Melbourne

From wall ovens to freestanding units, we make oven installs smooth, safe and compliant. Here’s what we take care of during your oven installation:

Get a quote

Electric Oven Installation

We install electric ovens with properly rated wiring, check your switchboard for capacity and ensure the appliance is safely connected and neatly fitted into the wall or under-bench.

Oven Replacements

We disconnect and remove your old oven, check or upgrade wiring if needed and fit the new unit into your existing space with a tidy finish and compliance certificate provided.

Wall Oven Install

Electcomm Group Electrical & Data securely mount your oven into cabinetry, confirms proper ventilation clearance and checks that all electrical connections meet current safety and load requirements.

Freestanding Oven Installs

We position your freestanding oven safely, run or connect the correct wiring and check that your circuit can support the amp draw of modern multi-function ovens.

Switchboard and Circuit Upgrades

If your oven needs a 15 to 32 amp dedicated circuit, we can upgrade your switchboard, install safety switches and ensure your setup meets today’s electrical standards.

Call Electcomm Group Electrical & Data

(03) 8789 8786

Why Professional Oven Installation Matters

Installing an oven isn’t just about plugging it in. It’s about safety, performance and making sure your kitchen setup meets today’s electrical standards. Here’s why it pays to call a licensed Melbourne electrician:

Correct wiring and circuit load

Ovens draw a lot of power. We make sure the circuit is correctly rated so there’s no risk of tripping, overheating or long-term damage.

Switchboard checks and upgrades

We inspect your switchboard, test for available amperage and upgrade safety switches or fuses if your oven needs more than your current system can handle.

Avoid fire and shock hazards

Loose connections, overloaded circuits or incorrect installs can lead to dangerous outcomes. We eliminate these risks before they start.

Protects your warranty and insurance

Most oven manufacturers require licensed installation for warranty to apply, and insurers may reject claims for unlicensed electrical work.

Neat, damage-free fit-off

We take care when removing old ovens and installing new ones so your cabinetry, tiles and walls are left in great condition.

Process

Our Oven Installation Process

Electcomm Group Electrical & Data keep the process simple, clean and compliant from the moment you book through to final testing. Here’s what to expect during your oven installation:

Book and Schedule

We organise a time that suits you, ask a few quick questions about your oven type and confirm access to the area.

Onsite Inspection

Our electrician checks the power supply, switchboard capacity, and measurements to ensure everything is ready for a smooth install.

Remove and Install

We disconnect the old oven, prep the area, connect your new unit with safe wiring and secure it into position.

Test and Certify

We test functionality, check current draw, and issue a compliance certificate so you know the job’s been done right.

Why Melbourne Homeowners Trust Us

From small apartment kitchens to full renovations, locals rely on us for fast, safe and professional oven installations. Here’s why we’re trusted across Melbourne:

Licensed and Insured

All oven installs are handled by qualified electricians, so your appliance is connected to code and backed by full compliance.

Fast Turnarounds

Need it in before the weekend or after your appliance delivery? Electcomm Group Electrical & Data offers same-day or next-day bookings when availability allows.

Fixed Upfront Quotes

No hidden extras. You’ll get a clear quote that includes removal, wiring, installation and certification.

Clean, Professional Finish

We treat your kitchen like our own, no mess, no rushed work, and a neat final result that’s ready to use.

Testimonials

What They Say About us

SihaVi Bouquet
Josh is the best, most friendly and helpful man to help me with my cable problems
Mel Gemelli
Great Service.
I received a call within minutes of logging my enquiry online. Kylie was amazing on the phone. Her communication was clear and her knowledge of the area was reassuring, making the whole experience smooth and positive.

Mick was prompt and professional. The quoting was clear and the suggestions of other matters were very helpful (I will definitely look to book them at a later date). The job was quick and clean.

Special mention of the Van it was very cool and bright and the fox will definitely attract the attention of kids.

Thanks again for the quick next morning response.
I needed a outdoor power point replaced due to storm damage all done within an hour.

Highly recommend
Casey
Highly recommend this company, great service.. moved into a new home and couldn’t find internet ports in house Mick was great ! Found connection an relocated with out a fuss! Kylie is reception is also super easy to deal with.
Steph Heyes
Rob was quick to move our nbn box and was extremely accomodating with times. Excellent communication from everyone in the business
James Paterson
Casper came to our business and connected two office buildings with 10 Gbps fibre lines (6 core), which have been working brilliantly ever since. Punctual, polite, friendly, and most importantly, does excellent quality work.

Highly Recommended.

James Paterson, I.T. Manager, Hydronic Systems Australia.
Joel Polkinghorne
Super fast coming out and installing a new smoke detector. Gave me options of equipment available and super flexible with payment. Would recommend.
Aiyana Roberts
Josh was an absolute weapon! Lovely guy and fixed our hot water and hallway light - honest, transparent, great work. Thanks!
chris hamod
I had Josh and Cooper work at my place amazing service, very tidy and very thoughtful on hole placements.

Very goo work, Josh was honest and transparent from the quote that why I chose to work with electcomm. Very professional highly recommended Josh and Cooper and Electcom.
Gerald Morna
Josh installed our induction hob and he did a great job!
Julie Hyne
Fabulous service, same day and on time, quickly and thoroughly assessed what needed to be done and completed the job timely , I now have great internet speed and coverage right through the house. Rob was very polite and pleasant to deal with
Raquel Floulis
Great experience, on time, friendly and quick.
Thanks Josh.
Evette Matthews
Thanks to the team at Electcomm for quickly responding to the power being out. They found the fault and gave us an option to upgrade our switchboard. All fixed in the day and they even cleaned up! Amazing service thanks.

Electrician in CArrum Downs

servicing Melbourne

Save yourself the hassle of multiple service providers and get in touch with Electcomm Group Electrical & Data to manage your properties. We have a large network of trades we can also call upon to provide seamless job outcomes saving time and money.

Upgrading Your Kitchen in Melbourne? Let’s Get That Oven Installed Right

Upgrading your kitchen or replacing a broken oven? Book now for a certified installation by licensed Melbourne electricians. We handle removals, wiring and compliance with fast and hassle-free service. Call Electcomm Group Electrical & Data on (03) 8789 8786 to book your oven installation today.
contact us

Frequently Asked Questions

Yes. If your oven is hardwired, it must be installed by a licensed electrician. This ensures the installation meets Australian Standards and keeps your appliance warranty and home insurance valid.
Yes. We can disconnect and remove the old unit as part of the installation. Just let us know when booking so we can allow time and bring any necessary tools.
Most electric ovens require their own dedicated circuit due to the amount of power they draw. We will check your switchboard and upgrade the circuit if needed.
This depends on the oven’s power rating. Smaller ovens may only need a 15 amp circuit, while larger models often require up to 32 amps. We match the oven to the correct circuit during installation.
Most oven installations take between one and two hours. If additional work is needed for the switchboard or wiring, we’ll let you know before starting.
Electcomm Group Electrical & Data install all major oven brands including Westinghouse, Bosch, Smeg, Fisher & Paykel, Electrolux and more. As long as the unit is compatible, we can install it.